Pro Tower Mfg. Shop

Provides for extra stability to mounts and frames.
• Hot-dip galvanized

(Customized upon request)

Allows for mounting of full antenna sectors onto the leg of a tower.
Custom face widths available upon request. (All phantom items in assembly views will not be included)                                      Stiff Arm included with hardware
Saddle Mounts sold separately
Pipe Mounts sold separately
Hot-dip galvanized                                                                                                                                                              (Customized upon request)

A shield to prevent snow and ice buildup on cell antennas, radio antennas, and microwave emitters. Also protects from other weather damage, such as precipitation.
Kit includes ice shield and mounting hardware
• Hot-dip galvanized
• Pipe Mounts sold separately

(Customized upon request)

Our ring mounts are used to attach antenna pipes, t-frame kits, and platform kits to existing polygon poles.

(Customized upon request)

Provides additional stability for the antenna mounts as well as extra safety for workers.

(Customized upon request)

Provides three stable sectors of antenna mounting in one unit. Available in complete kit or separate platform and upper support rails. (All pipe mounts sold separately)

(Customized upon request)

• Pipes may be mounted Vertically or Horizontally
• Includes U-bolts and stand-off mounting hardware
• 7” x 7” bolt pattern
• Antenna pipe sold separately
• Hot-dip galvanized

(Customized upon request)

• Includes attachment hardware ( including U-bolts for MP1150 only)
• Hot-dip galvanized
• 7” x 7” Bolt Pattern

(Customized upon request)

Chain mounts for monopole applications.
Fits polygon or round poles.

(Customized upon request)

Welds to existing polygon poles to provide access for routing coaxial cable. All parts are A572-65 material and plain black.

(Customized upon request)

Used to climb poles and tower legs.
• Includes hardware
• Hot-dip galvanized
• Other sizes available upon request

For use with platform kits or t-arm kits.
• Simple Bolt-on Kit used to reinforce existing platforms or T-arms when increased dead load is required (multiple RRU’s)
• Fits round or polygon poles from 10in to 45in O.D. & 30in to 60in O.D.
• Hot-dip galvanized

(Customized upon request)

• Pipe mount (sold separately)
• Ring mount included
• Hot-dip galvanized

(Customized upon request)

Provides mounting for full antenna sectors on top of water tank access tubes.

(Customized upon request)

Provides a bolt-together unit that is easy to transport and install.

(Customized upon request)

This tripod mount is specifically designed for water tank applications of cell and microwave antennas.

(Customized upon request)

Provides antenna mounting on the Upper Support Rail of a water tank.

(Customized upon request)

We have several water tank accessories for cabling and framing your cell antenna or microwave emitters.

(Customized upon request)

Leg brackets are utilized to provide support to multiple cable runs to microwave and cell antennas on the leg of a multi-leg water tank.

(Customized upon request)

Expansion brackets provide a no-weld expansion to fit the inside diameter of access tubes.

(Customized upon request)

Stiffener rings provide strength and reinforcement to the top portion of the existing access tube when mounting pod mounts.

(Customized upon request)

Provides access at the base of the pod mount for new or existing coax runs on the top of the water tank. Available for bolt-on and weld-on applications.

(Customized upon request)

Crossover Plate Kits use ASTM A36 plates, with u-bolts, and square u-bolts (depending on application) to add mounting support to existing platforms, t-frames, or antenna pipes to be added to existing equipment.

(Customized upon request)

Provides support structure for multiple coaxial cable runs.

(Customized upon request)

Our cable mounting brackets provide support to multiple coaxial runs.

(Customized upon request)

Allows multiple coaxial runs on the waveguide bridge.

(Customized upon request)

This includes PVC sleeper tubes for coax cable routing, cable tray covers, and PVC sleepers with cable tray covers in full assemblies.

(Customized upon request)

Provides support and protection to horizontal coax runs. Additional waveguide bridge support accessories such as Waveguide bridge support brackets(Horseheads), X-brace kits, and bolt-on base post shoe kits are available as well. If drop down does not apply to your desired purchase, please select “N/A”. 

(Customized upon request)

This is galvanized steel piping, available for many applications. We also sell pipe caps separately at various sizes. (A500 Material)

(Custom lengths upon request)

This is galvanized steel angle bars (90 degrees). Available as A36 or dual grade A36-50. Supplied at 20ft lengths.

(Custom lengths upon request)

This is galvanized steel flat bar.  Our flat Bar can be cut to desired length. (A36 Material)

(Custom lengths upon request)

These are simple galvanized steel bolts in various sizes.

These are simple galvanized steel nuts in various sizes.

These are simple galvanized lock washers in various sizes.

These are A325 Steel Bolts.

A563 (2H & DH) Steel Nuts for steel infrastructure and cellphone tower parts.

A325 Steel Flat Washers for steel infrastructure and cellphone tower parts.

These are steel wedge anchors for cellphone and radio towers.

These are various galvanized square rails(Unistrut) with slotted holes included for mounting, made from steel.

J-Bolts for tower installation.

These are simple steel U-Bolt assemblies that will include: (2) lock washers, (2) flat washers, (2) hex nuts per each U-Bolt.

Simple galvanized steel rods (threaded).

These are simple galvanized steel washers.

Galvanized Steel Square Flat Washers for steel infrastructure and cellphone tower parts.

Guy material, including thimbles, grips, sleeves and clips for radio tower manufacturing.

Galvanized Pal Nuts for steel infrastructure and cellphone tower parts.

Allows mounting full antenna sectors onto the leg of a tower.
Available in heavy-duty or standard variations.

• Stiff Arm included with hardware
• Pipe Mounts sold separately
• Saddle Mounts sold separately
• Hot-dip galvanized

(Customized upon request)

Provides extra stability and capacity for existing sector frames.
• Stand-off: 24″ to 36″
• Hot-dip galvanized

(Customized upon request)

Provides support for a single sector antenna while allowing separation from the tower.
Pipe Size (O.D.) for all is 2-3/8″.

• Tower attachment hardware sold separately
• Hot-dip galvanized

(Customized upon request)

Available in adjustable or welded varieties.
Adjustable mounts provide for vertical attachment of antennas. Welded mounts provide for heavy-duty mounting for antenna or microwave dishes, allowing for separation from the tower. Straight or Tapered.

(Customized upon request)

• Saddle mounts sold separately
• Hot-dip galvanized

No foundation is necessary allowing fast and easy installation. Other sizes can be created form this modular system

(Customized upon request)

Provides for extra stability to existing microwave dishes, mounts, frames, and antenna pipes for monopoles. Also, you will find upper support rail corner braces for monopole applications.
• Hot-dip galvanized

(Customized upon request)

Provides four stable sectors of antenna mounting in one unit. Available in a complete kit or separate platform or upper antenna support rails. (All pipes mounts sold separately)

(Customized upon request)

Provides for mounting omnidirectional antennas.
Stand-off foot kits sold separately from frames.
• Hot-dip galvanized

(Customized upon request)

Allows for mounting of full antenna sectors onto the leg of a tower.
Custom face widths available upon request.

• Stiff Arm included with hardware
• Saddle Mounts sold separately
• Pipe Mounts sold separately
• Hot-dip galvanized

(Customized upon request)

• Sliding brackets for adjustable tower attachments
• Antenna pipe sold separately (multiple pipe sizes can be used, please see assembly description)
• All components Hot-dip galvanized

(Customized upon request)

Creates co-location on stackable pod for new & existing carriers. (Custom lengths available upon request)

Pipe to Pipe Clamp Kits are used for attaching similar sized pipes in parallel orientation.

(Customized upon request)

Cellular Pipe Frames provide multiple antenna mounting locations per sector. (Support Arms sold separately)

Antenna Pipe Mounts provide vertical attachment points for antennas. (Existing horizontal assumed to be 3-1/2″ O.D. per each kit)

Allows mount attachment to round or angle leg tower members.

(Customized upon request)

Allows two sector antennas to be accommodated by a single support pipe.

(Customized upon request)

Wall Mounts allow for antenna pipe mounting on existing hollow or solid walls for rooftop applications.

(Customized upon request)

Easy to assemble rooftop antenna pipe supporting frames. These frames are excellent for quick installation, and can be set up without having to drill into existing rooftops and/or rooftop framing. Rubber mats to be included to eliminate the chance of damaging existing mounting surfaces.

(Customized upon request)

Rooftop Tripods are used for mounting antenna pipes on rooftop applications using mounting frames to center your antenna pipe and to ensure your antenna pipe is plumb. Our Rooftop Tripods are designed with diagonal braces for added stability.

(Customized upon request)

Grip strut grating is used to create non-slip walkways and stair treads. Available in 12 gauge and 14 gauge. Hot dip galvanized per manufacturers specifications. Also used to protect and guide coax cables and other equipment.

(Customized upon request)

This assembly allows for a lightweight alternative for supporting antennas on existing monopoles (Single, double, or triple sector assemblies available). These assemblies are designed to utilize lightweight universal stand-offs. Customer to specify stand-off length desired. (Stand-off sold separately)

(Customized upon request)

Different style grating clips to allow for multiple location fastening of existing bar grating or grip strut.

(Custom grate clips upon request)

Nylon Hardware will allow you to fasten delicate components together without damage component material, and/or material finishes.

Malleable Iron Beam Clamps can be used as a quick solution in the field when added clamping is required for existing tower components.

This antenna mount bracket can be mounted using formed mounting plates or can be welded on using our bare steel mounting plates (All included with this kit) on legged water tower legs to allow for more antenna mounting location possibilities.

(Customized upon request)

Here you will find accessories such as Davit arms for lifting material, Cat heads that (when accompanied with a capstan hoist & mounting bracket) can hoist material to required elevations on towers and/or monopoles, Cold Galv. Compound, and Lightning Rods.

This is Galvanized Channel, available in A36 or A529 depending on size.

(Custom length upon request)